IoT & EmbeddedAdvancedFYP / Projek Akhir Tahun Ready

Smart Door Lock System with Biometric and IoT Control

Smart Door Lock System with Biometric and IoT Control is an identity and access-control prototype that can be demonstrated with Optical fingerprint sensor, Magnetic reed switch. A realistic FYP outcome is a working prototype with this processing path: Reads sensors, applies control logic and provides WiFi/Bluetooth when required; Converts readings into a documented state, threshold or event. The result is delivered through WiFi router/hotspot and dashboard service, Solenoid lock with driver. The important proof is repeatable Time-stamped database or data logger, not just a device that powers on.

Ask About This Project View Report Guide

Project Snapshot

CategoryIoT & Embedded

DifficultyAdvanced

Time Required8-12 weeks including component testing, integration, calibration and demo preparation

CostNo fixed price. Cost depends on selected controller, sensors, communication modules, casing, dashboard/app features and documentation scope.

Suitable forDiploma, Degree, FYP, Projek Akhir Tahun

ComponentsESP32 development board, Optical fingerprint sensor, Magnetic reed switch, WiFi router/hotspot and dashboard service

Expected outputWiFi router/hotspot and dashboard service, Solenoid lock with driver

Quick Summary

Smart Door Lock System with Biometric and IoT Control is a identity and access-control prototype idea for students who need a working demo with Optical fingerprint sensor, Magnetic reed switch. A good version focuses on WiFi router/hotspot and dashboard service, Solenoid lock with driver using ESP32 development board, Optical fingerprint sensor, Magnetic reed switch, with testing evidence for input calibration or baseline, response time, repeatability, power stability, communications failure, and safe-state behaviour.

Difficulty

Advanced

Time Required

8-12 weeks including component testing, integration, calibration and demo preparation

Cost

No fixed price. Cost depends on selected controller, sensors, communication modules, casing, dashboard/app features and documentation scope.

Engineering profile

Identity and access-control prototype

Function Flow

Power and initialise

The regulated 5 v supply with common ground starts the ESP32 development board and connected modules within their voltage and current requirements.

Acquire the input

Optical fingerprint sensor + Magnetic reed switch supplies the project measurement, identity or trigger.

Validate the signal

Firmware rejects missing or implausible samples and applies calibration, debounce or averaging appropriate to the module.

Make the decision

The controller compares the validated value with the documented threshold, authorisation rule or operating state.

Act and communicate

Solenoid lock with driver presents the local result, while the communication link sends the corresponding event or reading.

Record and recover

The logger stores the input, decision, output and timestamp. On a fault, the system enters a defined safe state instead of silently continuing.

System Block Diagram

Functional signal and data path for the recommended prototype scope. Final pin assignments and electrical wiring must follow the exact module datasheets.

input

Optical fingerprint sensor + Magnetic reed switch

Captures and matches enrolled fingerprints; Reports open and closed state

process

ESP32 development board

Reads sensors, applies control logic and provides WiFi/Bluetooth when required

process

Filtering and decision logic

Converts readings into a documented state, threshold or event

output

Solenoid lock with driver

Locks or releases the prototype enclosure

communication

WiFi router/hotspot and dashboard service

Transfers readings and events to the selected application service

data

Time-stamped database or data logger

Stores readings, events and output states for report evidence

Optical fingerprint sensor + Magnetic reed switchmeasured signalESP32 development board

ESP32 development boardcalibrated value/eventFiltering and decision logic

Filtering and decision logicstatus/control commandSolenoid lock with driver

Filtering and decision logicalert/telemetryWiFi router/hotspot and dashboard service

WiFi router/hotspot and dashboard servicetimestamped recordTime-stamped database or data logger

Recommended Components & Platform

ESP32 development board

controller

Reads sensors, applies control logic and provides WiFi/Bluetooth when required

View component guide

Optical fingerprint sensor

input

Captures and matches enrolled fingerprints

Magnetic reed switch

input

Reports open and closed state

View component guide

WiFi router/hotspot and dashboard service

communication

Transfers readings and events to the selected application service

Time-stamped database or data logger

data

Stores readings, events and output states for report evidence

Solenoid lock with driver

output

Locks or releases the prototype enclosure

Regulated 5 V supply with common ground

power

Provides stable power while keeping higher-current loads on suitable drivers

Engineering Validation Notes

Verify every module voltage, logic level, current draw and driver requirement against the exact purchased board datasheet before wiring.

Calibrate or baseline the input with known test conditions and report repeatability, response time and observed limitations.

Learning Resources

Planning

How to choose a strong FYP topic

Use this before locking the title, objectives and prototype scope.

Planning

FYP proposal: title, objectives and scope

A practical guide for turning a project idea into a supervisor-ready proposal.

Tool

ESP32 Pinout Tool

Check safe GPIO pins, ADC notes, boot pins and wiring choices before building.

Guide

ESP32 safe GPIO pins guide

Avoid common ESP32 pin mistakes that can break a viva demo.

Guide

IoT dashboard and data logging guide

Choose Blynk, Firebase, ThingsBoard or a custom dashboard with clearer evidence.

Guide

Electronics troubleshooting checklist before demo

Check wiring, power, sensors, alerts and backup demo flow before viva day.

Build Scope Options

Basic prototype

Core demo using ESP32 development board, Optical fingerprint sensor, Magnetic reed switch, WiFi router/hotspot and dashboard service with visible input and output response.

Intermediate prototype

Adds dashboard/database logging, alerts, calibration notes, and cleaner wiring for reliable demonstration.

Advanced prototype

Adds casing, mobile/cloud features, multi-node setup, image processing, maps, or reporting depending on scope.

Expected Demo Outcome

Shows WiFi router/hotspot and dashboard service, Solenoid lock with driver from real or realistic Optical fingerprint sensor, Magnetic reed switch.
Stores or displays Time-stamped database or data logger as report evidence.
Demonstrates the main identity and access-control prototype workflow end to end.
Includes a clear test scenario for input calibration or baseline, response time, repeatability, power stability, communications failure, and safe-state behaviour.

Accuracy & Limitations

This is realistic for FYP when the scope stays controlled: Validate the input-to-controller-to-output path with safe bench tests before adding cloud features, casing, or extra modules.

Prototype reliability depends on correct wiring, stable power supply, and proper module selection.

Sensor readings can vary with placement, calibration, environment, and demo conditions.

IoT demos depend on stable WiFi, hotspot, or internet access unless an offline backup mode is prepared.

Validation & Testing Plan

Run repeated tests under controlled demo conditions and record readings or status changes.

Verify input calibration or baseline, response time, repeatability, power stability, communications failure, and safe-state behaviour before adding extra features.

Capture photos, dashboard screenshots, serial logs, or database entries as testing evidence.

Document sensor/module limits honestly so the report does not overclaim industrial accuracy.

Troubleshooting

If readings are unstable, test the sensor separately before connecting the dashboard or app.

If the module resets, check power supply, common ground, loose jumper wires, and current requirements.

If alerts or cloud updates fail, test WiFi, hotspot, SIM balance, API token, and internet connection early.

If the demo is hard to explain, focus on one repeatable workflow for WiFi router/hotspot and dashboard service, Solenoid lock with driver.

Common Mistakes

Choosing a scope that is too large for the available FYP timeline.
Validate the input-to-controller-to-output path with safe bench tests before adding cloud features, casing, or extra modules.
Writing objectives that do not match the actual prototype or software demo.
Preparing no backup demo flow for viva day.
Using weak power supply, loose jumper wires, or unprotected sensors during demonstration.
Skipping calibration or test readings before presenting results.

Suggested Report Sections

Problem statement and project background

Objectives focused on identity and access-control prototype and achievable prototype scope

System block diagram showing Optical fingerprint sensor, Magnetic reed switch -> processing -> WiFi router/hotspot and dashboard service, Solenoid lock with driver

Methodology using ESP32 development board, Optical fingerprint sensor, Magnetic reed switch, WiFi router/hotspot and dashboard service with data flow and user/prototype workflow

Testing results for input calibration or baseline, response time, repeatability, power stability, communications failure, and safe-state behaviour

Limitations, discussion, and future improvements

Alternatives

Mobile app or Blynk dashboardFirebase or cloud databaseTelegram, WhatsApp, or SMS alertingCustom enclosure and cleaner wiring

Related Projects

Smart Food Storage System with Temperature and Humidity Control via IoT

IoT, DHT22, Relay

IoT-Based Smart Parking System with Automated Payment and RFID Identification

IoT, RFID, Payment

Real-Time Air Quality Monitoring System for Indoor Spaces with App Alerts

IoT, Air Quality, ESP32

IoT-Based Smart Kitchen Appliance Monitoring System with Alerts

IoT, Current Sensor, ESP32

IoT-Enabled Smart Fan Control with Temperature and Humidity Sensors

IoT, DHT22, Relay

IoT-Enabled Smart Water Sprinkler System for Lawns with Weather Forecast Integration

IoT, Weather API, Relay

FAQ

Is "Smart Door Lock System with Biometric and IoT Control" suitable for FYP?

Yes. This title can be suitable for FYP or Projek Akhir Tahun when the scope is controlled. The recommended scope is validate the input-to-controller-to-output path with safe bench tests before adding cloud features, casing, or extra modules.

What difficulty level is this project?

The suggested difficulty is Advanced. The actual difficulty depends on whether you choose a basic, intermediate, or advanced prototype scope.

What platform can this project use?

This project can be planned using ESP32 development board, Optical fingerprint sensor, Magnetic reed switch, WiFi router/hotspot and dashboard service. The final platform can be adjusted based on supervisor requirements and the chosen scope; common alternatives include Arduino, ESP32, Raspberry Pi, or another controller depending on the required features.

Is there a fixed project price?

No fixed price is published because the final quotation depends on project scope, features, timeline, hardware, software, and documentation requirements.

Can Rectronx help with documentation and demo preparation?

Yes. Rectronx can help with project planning, prototype development, coding explanation, report structure, testing evidence, and demo preparation.