Smart Gas Cylinder Weight Monitoring with Delivery Alert
Smart Gas Cylinder Weight Monitoring with Delivery Alert is a safety detection and alert prototype that can be demonstrated with Task-appropriate MQ-series gas sensor, Load cell with HX711 amplifier. A realistic FYP outcome is a working prototype with this processing path: Reads sensors, applies control logic and provides WiFi/Bluetooth when required; Converts readings into a documented state, threshold or event. The result is delivered through SIM800L/SIM7600 cellular module, OLED, LCD or LED display, Active buzzer and status LEDs. The important proof is repeatable input readings, decisions, output states, timestamps, and test results, not just a device that powers on.
Project Snapshot
Quick Summary
Smart Gas Cylinder Weight Monitoring with Delivery Alert is a safety detection and alert prototype idea for students who need a working demo with Task-appropriate MQ-series gas sensor, Load cell with HX711 amplifier. A good version focuses on SIM800L/SIM7600 cellular module, OLED, LCD or LED display, Active buzzer and status LEDs using ESP32 development board, Task-appropriate MQ-series gas sensor, Load cell with HX711 amplifier, with testing evidence for input calibration or baseline, response time, repeatability, power stability, communications failure, and safe-state behaviour.
Difficulty
Intermediate
Time Required
4-8 weeks for wiring, coding, dashboard/app integration and repeated testing
Cost
No fixed price. Cost depends on selected controller, sensors, communication modules, casing, dashboard/app features and documentation scope.
Engineering profile
Safety detection and alert prototype
Function Flow
Power and initialise
The regulated 5 v supply with common ground starts the ESP32 development board and connected modules within their voltage and current requirements.
Acquire the input
Task-appropriate MQ-series gas sensor + Load cell with HX711 amplifier supplies the project measurement, identity or trigger.
Validate the signal
Firmware rejects missing or implausible samples and applies calibration, debounce or averaging appropriate to the module.
Make the decision
The controller compares the validated value with the documented threshold, authorisation rule or operating state.
Act and communicate
OLED, LCD or LED display + Active buzzer and status LEDs presents the local result, while the communication link sends the corresponding event or reading.
Record and recover
The test sheet records the input, decision and output. On a fault, the system enters a defined safe state instead of silently continuing.
System Block Diagram
Functional signal and data path for the recommended prototype scope. Final pin assignments and electrical wiring must follow the exact module datasheets.
Task-appropriate MQ-series gas sensor + Load cell with HX711 amplifier
Detects a relative gas/smoke response after warm-up and baseline testing; Measures calibrated weight
ESP32 development board
Reads sensors, applies control logic and provides WiFi/Bluetooth when required
Filtering and decision logic
Converts readings into a documented state, threshold or event
OLED, LCD or LED display + Active buzzer and status LEDs
Shows local readings and system state; Provides immediate local warning and state indication
SIM800L/SIM7600 cellular module
Sends SMS or data using a powered SIM connection
Recommended Components & Platform
ESP32 development board
controllerReads sensors, applies control logic and provides WiFi/Bluetooth when required
View component guide
Task-appropriate MQ-series gas sensor
inputDetects a relative gas/smoke response after warm-up and baseline testing
Load cell with HX711 amplifier
inputMeasures calibrated weight
View component guide
SIM800L/SIM7600 cellular module
communicationSends SMS or data using a powered SIM connection
View component guide
OLED, LCD or LED display
outputShows local readings and system state
Active buzzer and status LEDs
outputProvides immediate local warning and state indication
Regulated 5 V supply with common ground
powerProvides stable power while keeping higher-current loads on suitable drivers
Engineering Validation Notes
Verify every module voltage, logic level, current draw and driver requirement against the exact purchased board datasheet before wiring.
Use controlled test sources and present this as an educational prototype, not a certified life-safety system.
Learning Resources
How to choose a strong FYP topic
Use this before locking the title, objectives and prototype scope.
FYP proposal: title, objectives and scope
A practical guide for turning a project idea into a supervisor-ready proposal.
ESP32 Pinout Tool
Check safe GPIO pins, ADC notes, boot pins and wiring choices before building.
ESP32 safe GPIO pins guide
Avoid common ESP32 pin mistakes that can break a viva demo.
GPS vehicle tracking system FYP guide
Understand GPS lock, GSM alerts, map links and testing limitations.
Electronics troubleshooting checklist before demo
Check wiring, power, sensors, alerts and backup demo flow before viva day.
Build Scope Options
Basic prototype
Core demo using ESP32 development board, Task-appropriate MQ-series gas sensor, Load cell with HX711 amplifier, SIM800L/SIM7600 cellular module with visible input and output response.
Intermediate prototype
Adds dashboard/database logging, alerts, calibration notes, and cleaner wiring for reliable demonstration.
Advanced prototype
Adds casing, mobile/cloud features, multi-node setup, image processing, maps, or reporting depending on scope.
Expected Demo Outcome
- Shows SIM800L/SIM7600 cellular module, OLED, LCD or LED display, Active buzzer and status LEDs from real or realistic Task-appropriate MQ-series gas sensor, Load cell with HX711 amplifier.
- Stores or displays input readings, decisions, output states, timestamps, and test results as report evidence.
- Demonstrates the main safety detection and alert prototype workflow end to end.
- Includes a clear test scenario for input calibration or baseline, response time, repeatability, power stability, communications failure, and safe-state behaviour.
Accuracy & Limitations
This is realistic for FYP when the scope stays controlled: Validate the input-to-controller-to-output path with safe bench tests before adding cloud features, casing, or extra modules.
Prototype reliability depends on correct wiring, stable power supply, and proper module selection.
Sensor readings can vary with placement, calibration, environment, and demo conditions.
GSM and SMS features depend on SIM balance, signal coverage, and telco network availability.
Validation & Testing Plan
Run repeated tests under controlled demo conditions and record readings or status changes.
Verify input calibration or baseline, response time, repeatability, power stability, communications failure, and safe-state behaviour before adding extra features.
Capture photos, dashboard screenshots, serial logs, or database entries as testing evidence.
Document sensor/module limits honestly so the report does not overclaim industrial accuracy.
Troubleshooting
If readings are unstable, test the sensor separately before connecting the dashboard or app.
If the module resets, check power supply, common ground, loose jumper wires, and current requirements.
If alerts or cloud updates fail, test WiFi, hotspot, SIM balance, API token, and internet connection early.
If the demo is hard to explain, focus on one repeatable workflow for SIM800L/SIM7600 cellular module, OLED, LCD or LED display, Active buzzer and status LEDs.
Common Mistakes
- Choosing a scope that is too large for the available FYP timeline.
- Validate the input-to-controller-to-output path with safe bench tests before adding cloud features, casing, or extra modules.
- Writing objectives that do not match the actual prototype or software demo.
- Preparing no backup demo flow for viva day.
- Using weak power supply, loose jumper wires, or unprotected sensors during demonstration.
- Skipping calibration or test readings before presenting results.
- Testing GSM/GPS only indoors and discovering signal issues during final demo.
Suggested Report Sections
Problem statement and project background
Objectives focused on safety detection and alert prototype and achievable prototype scope
System block diagram showing Task-appropriate MQ-series gas sensor, Load cell with HX711 amplifier -> processing -> SIM800L/SIM7600 cellular module, OLED, LCD or LED display, Active buzzer and status LEDs
Methodology using ESP32 development board, Task-appropriate MQ-series gas sensor, Load cell with HX711 amplifier, SIM800L/SIM7600 cellular module with data flow and user/prototype workflow
Testing results for input calibration or baseline, response time, repeatability, power stability, communications failure, and safe-state behaviour
Limitations, discussion, and future improvements
Alternatives
Related Projects
Smart Gas Cylinder Weight Monitoring with Low-Level Alert
Load Cell, ESP32, Display
Smart School Bag Weight Monitor with Parent Alert
Load Cell, ESP32, App
IoT-Based Bridge Condition Monitoring System with Structural Health Alerts
IoT, Vibration, ESP32
IoT-Enabled Smart Roof Leak Detection System with Weather Alerts
IoT, Water Sensor, ESP32
Smart Water Tank Control System with Pump Protection and Level Alerts
Water Level, Relay, ESP32
Smart Fire Detection System with Flame Sensor and GSM Alert
Flame Sensor, GSM, Arduino
FAQ
Is "Smart Gas Cylinder Weight Monitoring with Delivery Alert" suitable for FYP?
Yes. This title can be suitable for FYP or Projek Akhir Tahun when the scope is controlled. The recommended scope is validate the input-to-controller-to-output path with safe bench tests before adding cloud features, casing, or extra modules.
What difficulty level is this project?
The suggested difficulty is Intermediate. The actual difficulty depends on whether you choose a basic, intermediate, or advanced prototype scope.
What platform can this project use?
This project can be planned using ESP32 development board, Task-appropriate MQ-series gas sensor, Load cell with HX711 amplifier, SIM800L/SIM7600 cellular module. The final platform can be adjusted based on supervisor requirements and the chosen scope; common alternatives include Arduino, ESP32, Raspberry Pi, or another controller depending on the required features.
Is there a fixed project price?
No fixed price is published because the final quotation depends on project scope, features, timeline, hardware, software, and documentation requirements.
Can Rectronx help with documentation and demo preparation?
Yes. Rectronx can help with project planning, prototype development, coding explanation, report structure, testing evidence, and demo preparation.